After promises of a wireless charging kit, expensive 3rd-party options, getting a semi-official version months and months later from Samsung/Verizon and numerous delays, I decided to stop waiting. I don't particularly care for wireless charging, I think it is pretty cool, but it is a bit slower than just plugging in a device. The cost has been a major issue for me, even if the device came with it built-in like the Lumia 920 and Nexus 4, the docks cost 3x as much as a standard wall adapter, I just didn't think it was worth the money. Enter the Palm Touchstone.
A few years ago the world, okay the tech world, was caught off guard by the newly announced Palm Pre, it was to be a resurrection of the Palm brand. Along with the new software and, at the time, impressive new hardware, the Pre brought with it a wireless charge kit, you could spend $50 to get a replacement battery cover and the dock. Unluckily for Palm, the devices, and to a lesser extent their software, never made a significant impact on the market, Android and iOS dominated and crushed Palm's aspirations. Luckily for me, and many others, the Palm Touchstone docks are real cheap, between $8-$15 a piece. The battery covers are even cheaper, between $1-$8 and come in a variety of colors and styles.
I found this handy guide online (thanks XDA!), that outlines all that is needed to transplant the innards of a single Palm Touchstone enabled battery cover onto my Galaxy S3. This doesn't not work with most phones, so unless you have a GS3 you may have to go with a sled or complete battery cover replacement to get the same result. Since Samsung announced the availability of wireless charging for the GS3 it comes prewired for a replacement cover that would just snap into place. There are two nodes on the back (inside) of the device which makes this hack a breeze.
I'm not going to do a tutorial I just wanted to show off and explain my experience with doing the hack and my results. The guide was easy to follow, I ordered a battery cover and dock, when they came in, I got to work. The battery cover was surprisingly easy to deal with, I pulled up all of the important pieces amend popped out the magnets. Then lined up all the pieces within the back of my phone and taped them down. After figuring out where to buy copper tape (Hobby Lobby or other craft stores, apparently it is used for Stained-Glass window making...), I added the final pieces, snapped everything together, and hoped for the best.
It didn't work at first, I had to re-align the copper contacts to get them to line up just right and not cross over. Then I dropped it on the charger, everything lined up correctly, the device snapped into place, the screen came on and began charging. Awesome! It took about $15 and about 30 minutes to complete the hack. The back cover now bulges out slightly but everything snaps down and it looks the same to the untrained eye. I only have one dock for the time being, and it is great being able to just pop it on the dock right before bed and not have to fiddle with the cable in the dark. Daydream (available in Jelly Bean 4.2) allows the clock to display after the phone begins charging, now I have an alarm clock that I can actually see while laying down in bed. If you have a GS3 and are wanting to have a little (somewhat risky) fun with your device, this is a great and cheap hack, easily reversible, unless you snap the thin battery cover while removing it. Or you can wait for the Galaxy S4, which will, just as Samsung promised with the GS3, have a wireless charging kit available for purchase at/or around launch.
I upgraded my aging T-Mobile G2 (HTC Desire Z) in November, and boy what a difference 2 years makes. The Samsung Galaxy S III (SGH-T999) is leaps and bounds better than my old phones. It isn’t just the pretty hardware and speedy internals, Google’s latest OS update, Ice Cream Sandwich (Android 4.0) is a HUGE improvement and eliminates almost every complaint someone could throw at Android. The Galaxy S3, as of this writing, is the best Android phone to get, and it is available everywhere, on any carrier. Despite my praises however there are some things that hold it back, and Samsung is to blame, not Google or Android. I’ve rooted and installed CyanogenMod on each of my previous phones, including the original Android phone, the T-Mobile G1. Both of my previous phones came with stock or close to stock Android straight from Google. I flashed CyanogenMod (CM6 on my G1, CM7 on my G2) mostly due to lack of official updates from Google, both the G1/G2 were left behind due to hardware limitations. CyanogenMod breathed life into my aging devices and allowed me to prevent spending money on newer hardware for that much longer. 2 years is a long time to wait in the mobile world, especially when newer and much better devices were being released every few months in the early days of Android.
When I bought the phone I decided to leave it alone and give Samsung’s stock experience in tact. Their custom interface, which runs more than skin deep, is called TouchWiz. TouchWiz does a few things for Samsung, it makes their devices “look” like Samsung, this is good for them, since this skin is consistent starting with their Galaxy S line of phones. TouchWiz also adds some nifty features (notification toggles, gestures, camera) that make it compelling to people that are new to Android, they also add some features that Google doesn’t provide natively in Android. However they also break a few things and ruin the Android experience with their proprietary sharing implementation, their confusing USB Mass Storage options, and other little things that, admittedly, many people don’t notice or care about.
I lived with a completely stock, out of the box Samsung TouchWiz (Android 4.0.4) experience for about 3 days before getting frustrated with Samsung’s “helpful” additions to Android. After rooting and installing CyanogenMod (CM10, based off of Android 4.1), which also upgraded my phone to the (at the time) latest version of Android Jelly Bean, which wasn’t officially available for any phone other than Google’s own Galaxy Nexus and their Nexus 7 tablet. Once I had installed CM10, life was good, the phone performed beautifully, Samsung’s hideous UI was gone, and I was able to use Android as Google intended. I did lose a few things though, it has been 2 months and I haven’t missed them. When you install stock Android, you lose all/most of the custom stuff that Samsung has installed including some of their proprietary (albeit nifty) sharing features, WiFi direct doesn’t work natively, Smart Stay (their eye-tracking feature) goes away, and a few other bullet points on Samsung’s checklist for why their phone is better than every other phone on the market.
TouchWiz vs CM10
Some of the noticeable differences are the Notification Toggles, which are completely customizable, and don’t take up half the screen like Samsung’s implementation. The blocky, candy-colored theme of Samsung has been replaced with Google’s much more subtle and clean look.
TouchWiz vs CM10
After a few days, I discovered a hack (links on bottom of post) that would allow me to remove my biggest complaint against the Galaxy S3 and pretty much every Android phone that has been released since the Galaxy Nexus introduced on-screen buttons. Hardware buttons need to die. I’m all for a power button, volume rocker and a dedicated camera button, but we don’t need them on the face of the device. Once Google decided that the menu button needed to go away in Android 3.0 (Honeycomb), there is no need to have a physical key dedicated to its use! I absolutely hate the single hardware button flanked with 2 capacitive keys on Samsung’s latest phone (and the Galaxy Note series), this used to be exclusive to the International version, but this time around Samsung was able to strong-arm the carriers domestically and each GS3 in the US has the same layout. The hack allows me to display on-screen buttons, and disable the hardware keys completely, or in my case, turn the home button into the missing dedicated camera button. This is great, in that it allows me to prevent accidental taps of the back/menu buttons, and I don’t need to have their backlights draining my battery, since they no longer light up as the sensors are no longer in use.
After all of this, which only took a few hours, I now have the most awesome phone on the market. I took my, pretty awesome, Galaxy S3 and turned it into the device that Google could have introduced, granted the device is already 6-months into its life and we’ll probably see a refresh, presumably the Galaxy S4, announced in March. I’m completely content and happy with what I have, and can’t wait to update to CM10.1 (based on Android 4.2), once it reaches semi-stable, monthly snapshot status (within a few weeks), I’m not hardcore enough to flash nightly builds onto my phone.
DISCLAIMER: I take no responsibility for broken, bricked, damaged, dead, eviscerated, warranty voided devices. Proceed with caution, and remember to READ EVERYTHING before getting started. Happy modding!
